FAQs & Troubleshooting
Popular |
94 Results
- 1Maintenance (Clean the hook) [ Video ]
- 2How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 3How to use the the versatile magnetic frame [Video instructions]
- 4Maintenance (Oiling the machine) [ Video ]
- 5There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 6Maintenance (Cleaning around the needle plate) [ Video ]
- 7How to set up the cap frame. [Video instructions]
- 8How to Embroider on Cap. [Video instructions]
- 9"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 10Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 11Maintenance (Cleaning the bobbin case) [ Video ]
- 12Maintenance (Clean the hook)
- 13"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 14"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 15"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 16"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 17"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 18"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 19"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 20How to set up the cap frame driver. [Video instructions]
- 21How to Embroider on Bag. [Video instructions]
- 22How to Embroider on Clothes. [Video instructions]
- 23How to Embroider on Shoes. [Video instructions]
- 24"Transmitting by USB" message appears on the LCD. What does it mean?
- 25"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 26Maintenance (Cleaning the thread paths of the upper threads)
- 27Maintenance (Cleaning the bobbin case)
- 28Maintenance (Cleaning around the needle plate)
- 29"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 30"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 31"Trimming sensor error." message appears on the LCD. What does it mean?
- 32"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 33How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 34"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 35Maintenance (Oiling the machine)
- 36Stabilizers (Backing)
- 37Hooping the Fabric
- 38Fabric and Thread
- 39"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 40"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 41"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 42"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 43"This pattern cannot combine." message appears on the LCD. What does it mean?
- 44"This pattern cannot be used." message appears on the LCD. What does it mean?
- 45"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 46"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 47"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 48"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 49"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 50"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?