FAQs & Troubleshooting
![]() |
Popular |
165 Results
- 51How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 52When setting fabric for edge sewing, the fabric edge indicator line does not appear on the LCD screen / the Fabric edge indicator line doesn't align with the edge of the fabric / the "Distance from edge of fabric" indication doesn't stabilize.
- 53How do I thread my machine for use with the twin needle option?
- 54Sewing is started even though the presser foot is raised.
- 55It is difficult to pass the thread through the needle bar thread guide(hook).
- 56"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 57"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- 58"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 59When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 60Why does the upper thread keep breaking?
- 61"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 62"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 63How do I change the needle ?
- 64How do I thread my machine ?
- 65"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 66"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 67"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 68"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 69"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 70"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 71Upper threading (Point)
- 72How do I correctly install a bobbin?
- 73Fabric and Thread
- 74How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 75How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 76How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 77"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 78"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 79If the thread breaks during sewing.
- 80"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 81"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 82"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 83How do I attach or remove the Embroidery Unit?
- 84How do I set the bobbin ?
- 85How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 86How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 87How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 88How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 89The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 90Despite selecting an edge sewing-compliant pattern, edge-sewing key appears in grey and cannot be selected.
- 91Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 92When can we use Standard GREEN Marked Bobbin Case?
- 93"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 94"This USB media is incompatible." message appears on the LCD. What does it mean?
- 95"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 96"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 97"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 98"Transmitting by USB" message appears on the LCD. What does it mean?
- 99"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 100"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?