FAQs & Troubleshooting
![]() |
Popular |
139 Results
- 51"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
- 52"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 53"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 54"Change to a larger embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 55"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 56"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
- 57"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 58"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 59How do I clean the race?
- 60How do I remove the presser foot holder?
- 61How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 62I tried to upgrade the machine with USB media. But the message "Saving the upgrade file. Do not turn main power to OFF." appeared for more than 5 minutes and I still can't upgrade it.
- 63Why does the upper thread keep breaking?
- 64How do I sew an applique?
- 65How can I speed the transfer rate up to retrieve embroidery patterns from the USB flash drive?
- 66Why is there an extra needle plate supplied with my machine?
- 67"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD. What does it mean and how do I clear it?
- 68"This USB media is incompatible." message appearing on the LCD. What does it mean and how do I clear it?
- 69"Turn off the power and replace the needle plate." message appearing on the LCD. What does it mean and how do I clear it?
- 70"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 71"The feed dogs are raised. Lower them." message appearing on the LCD. What does it mean and how do I clear it?
- 72"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 73"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- 74"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?
- 75"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 76"Change to the extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 77"Change to the large, or extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 78"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 79"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 80"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 81"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 82"Select a pattern." message appears on the LCD. What does it mean?
- 83"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 84How do I confirm Windows98SE?
- 85How do I recall a specific embroidery pattern from USB media?
- 86Why does my thread keep jamming?
- 87Why is the outline sewing off the pattern?
- 88How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 89How do I sew such as vinyl, leather, quilting layers and velvet?
- 90How do I sew a blind hem?
- 91When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 92How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 93How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 94How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 95"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 96For better results when sewing stretch fabrics
- 97How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 98How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 99How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 100How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]