Innov-is 980D
![]() |
FAQs & Troubleshooting |
28 Results
Sort by
- 120.05.2024F** or "F*" appears on the LCD. What does it mean?
- 202.07.2018"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 304.06.2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 404.06.2018"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 504.06.2018"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 631.03.2016"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 731.03.2016"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 831.03.2016"Saving..." message appearing on the LCD. What does it mean?
- 931.03.2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 1031.03.2016"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 1131.03.2016"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 1231.03.2016"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 1331.03.2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 1431.03.2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 1531.03.2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 1631.03.2016"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 1731.03.2016"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 1814.05.2015"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 1914.05.2015"Deleting..." message appearing on the LCD. What does it mean?
- 2014.05.2015"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 2114.05.2015"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 2214.05.2015"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 2314.05.2015"Selected a pattern." appears on the LCD.
- 2414.05.2015"Change to the single needle mode." appears on the LCD.
- 2507.04.2009"Lower the presser foot lever." appears on the LCD.
- 2607.04.2009"Lower the buttonhole lever." appears on the LCD.
- 2707.04.2009"Lift the buttonhole lever." appears on the LCD.
- 2807.04.2009"The safety device has been activated." appears on the LCD.