FAQs & Troubleshooting
Popular |
57 Results
- 1Thread tension [Video instructions]
- 2Combination of fabric, thread and needle
- 3Fabric and Thread
- 4Where do I put the oil in my machine?
- 5Incorrect thread tension
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7Winding the bobbin and lower thread setting[Video instructions]
- 8How do I wind the bobbin?
- 9An "E3" message appears on the panel.
- 10Threading the machine.
- 11How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 12The bobbin thread cannot be pulled up.
- 13How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 14Maintenance [Video instructions]
- 15How do I thread my machine?
- 16Using the Spool Pin.
- 17How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 18How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 19How do I clean the machine? (Cleaning the race)
- 20Why does the lower thread keep breaking?
- 21How do I remove or attach the presser foot ?
- 22An "E6" message appears on the panel.
- 23An "E5" message appears on the panel.
- 24An "E4" message appears on the panel.
- 25The machine does not make stitches
- 26Replacing the needle [Video instructions]
- 27Buttonhole sewing [Video instructions]
- 28Start sewing [Video instructions]
- 29Setting up the sewing machine[Video instructions]
- 30How do I change the needle ?
- 31How do I sew an applique?
- 32How do I correctly install a bobbin?
- 33F** or "F*" appears on the LCD. What does it mean?
- 34Tangled thread on wrong side of fabric
- 35For better results when sewing stretch fabrics
- 36How do I install the bobbin wound with thread?
- 37An "E1" message appears on the panel.
- 38My thread keeps jamming.
- 39The tension does not set on my sewing machine.
- 40How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 41Reverse sewing [Video instructions]
- 42Blind hem stitching [Video instructions]
- 43Overcasting [Video instructions]
- 44Adjusting the stiitch length and width [Video instructions]
- 45Upper threading [Video instructions]
- 46How do I remove or attach the presser foot holder?
- 47Upper thread tightened up
- 48How do I draw up the lower thread?
- 49When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 50An "E2" message appears on the panel.