FAQs & Troubleshooting
Latest |
75 Results
- 121/12/2023How do I raise or lower the feed dogs?
- 209/07/2019"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 323/10/2018Fabrics and stabilizer material for embroidery
- 406/08/2018"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 503/08/2018"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 603/08/2018"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 704/06/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 816/02/2017When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 929/07/2016"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 1029/07/2016"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 1129/07/2016"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 1229/07/2016"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 1323/10/2015Why does the lower thread keep breaking?
- 1421/10/2015Combination of fabric, thread and needle
- 1522/04/2015How do I sew a blind hem?
- 1606/02/2014How do I thread my machine?
- 1706/02/2014How do I wind the bobbin?
- 1808/11/2011Where do I put the oil in my machine?
- 1902/04/2008It is difficult to pass the thread through the needle bar thread guide(hook).
- 2030/01/2008How do I remove the presser foot holder?
- 2128/01/2008How do I sew buttonholes?
- 2228/01/2008How do I sew on vinyl, leather, quilting layers and velvet?
- 2324/01/2008How do I sew an applique?
- 2424/01/2008How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 2518/01/2008"Lower the presser foot lever." appears on the LCD.
- 2607/12/2007"Cannot change the configuration of the characters." appears on the LCD.
- 2706/11/2007"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 2806/11/2007"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 2906/11/2007How do I correctly install a bobbin?
- 3012/10/2007Embroidery
- 3103/10/2007Fabric and Thread
- 3202/10/2007The tension does not set on my sewing machine.
- 3327/09/2007Using the Spool Pin.
- 3408/01/2007My thread keeps jamming.
- 3508/01/2007My upper thread keeps breaking.
- 3604/08/2006How do I create a space between characters?
- 3703/07/2006"Set the bobbin holder to the left." appears on the LCD.
- 3803/07/2006"Formatting the floppy disk."appears on the LCD.
- 3903/07/2006"There is a pattern included that cannot be saved to a floppy disk. Save the pattern in the machine's memory." appears on the LCD.
- 4003/07/2006"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" appears on the LCD.
- 4103/07/2006"Deleting..." appears on the LCD.
- 4203/07/2006"There is not much thread remaining in the bobbin." appears on the LCD.
- 4303/07/2006"Saving..." appears on the LCD.
- 4403/07/2006"This disk is write protected. Can not delete the pattern. Dis-engage the write protection and try to delete again." appears on the LCD.
- 4503/07/2006"This disk is write protected. Cannot save the pattern. Dis-engage the write protection and save again." appears on the LCD.
- 4603/07/2006"No disk inserted or this disk may be defective." appears on the LCD.
- 4703/07/2006"Cannot save to this disk. The disk may be defective. Change the disk and try to save again." appears on the LCD.
- 4803/07/2006"Cannot format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." appears on the LCD.
- 4930/06/2006"Cannot read this disk. This disk may be defective." appears on the LCD.
- 5030/06/2006"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." appears on the LCD.