FAQs & Troubleshooting
Popular |
132 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Changing the embroidering position and Adjusting the angle
- 3Displaying the fabric on the LCD when aligning the embroidering position
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to Embroider on Pet Collar. [Video instructions]
- 6How do I specify the starting position or the ending position of embroidering?
- 7How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 8Aligning the embroidering position using the built-in camera
- 9Maintenance (Cleaning the bobbin case) [ Video ]
- 10Maximum sewing speed setting
- 11Why does the upper thread keep breaking?
- 12How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 13How to use the Round frame (PRPRFK1) [Video instructions]
- 14How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 15Temporary needle bar setting
- 16Colors of Tajima (.dst) embroidery data
- 17How to set up the cap frame. [Video instructions]
- 18How to Embroider on Bag. [Video instructions]
- 19Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 20Aligning the embroidering position using the embroidery positioning sticker
- 21How do I manually specify or manage the thread colors assigned to each needle bar?
- 22How do I install the bobbin wound with thread?
- 23How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 24How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 25Specifying jumpstitch trimming or DST jump codes for trimming
- 26Setting the machine to stop at color changes
- 27Reserved needle bar and sewing speed settings
- 28Loops appear on the surface of the fabric when embroidering.
- 29How to set up the cap frame driver. [Video instructions]
- 30Basting Embroidery
- 31How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 32Maintenance (Cleaning around the needle plate) [ Video ]
- 33Maintenance (Clean the hook) [ Video ]
- 34There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 35Maintenance (Cleaning the bobbin case)
- 36How to use the the versatile magnetic frame [Video instructions]
- 37Convenience of the manual color sequence
- 38The thread tension is incorrect.
- 39Embroidery pattern does not sew out correctly.
- 40Stitches are skipped.
- 41How do I adjust the tension of the bobbin thread ?
- 42How to Embroider on Clothes. [Video instructions]
- 43How to Embroider on Cap. [Video instructions]
- 44How to Embroider on Shoes. [Video instructions]
- 45"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 46"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 47"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 48How do I delete short stitches ?
- 49How do I check the thread tension ?
- 50How do I resume embroidering after turning off the machine ?