FAQs & Troubleshooting
Popular |
35 Results
- 1Using the Spool Pin.
- 2Where do I put the oil in my machine?
- 3"Winding bobbin thread." appears on the LCD.
- 4How do I wind the bobbin?
- 5How do I correctly install a bobbin?
- 6How do I use the needle threader?
- 7"Calculating. Please wait." appears on the LCD.
- 8"No more stitches can be combined." appears on the LCD.
- 9"Embroidery pattern is exceeding sewing area." appears on the LCD.
- 10"This key does not work when needle is at low position. Raise the needle to high position and touch key again." appears on the LCD.
- 11"Select pattern." appears on the LCD.
- 12How do I thread my machine?
- 13My outline is sewing off the pattern
- 14"Lower the presser foot lever." appears on the LCD.
- 15It is difficult to pass the thread through the needle bar thread guide(hook).
- 16"Saving" appears on the LCD.
- 17"Complete pattern entry." appears on the LCD.
- 18"Raise the needle to high position." appears on the LCD.
- 19"This pattern is stored in other embroidery card." appears on the LCD.
- 20"Return the bobbin winding shaft to left." appears on the LCD.
- 21"Calculating cannot be done halfway through." appears on the LCD.
- 22"Colour cannot be changed halfway." appears on the LCD.
- 23"Raise the presser foot and re-thread." appears on the LCD.
- 24"Embroidery card is not inserted. Turn off main power and insert card." appears on the LCD.
- 25"This pattern cannot be saved in the memory." appears on the LCD.
- 26"No pattern is memorized." appears on the LCD.
- 27"Check if thread is entangled. Check if needle is bent." appears on the LCD.
- 28"Check if upper or lower thread is cut." appears on the LCD.
- 29Why does the lower thread keep breaking?
- 30Fabrics and stabilizer material for embroidery
- 31Threading the machine.
- 32How do I create a space between characters?
- 33When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 34Embroidery
- 35When thread gets tangled.