FAQs & Troubleshooting
![]() |
Popular |
237 Results
- 1How to use the Multi-purpose Screwdriver.
- 2Tutorial videos on how to use the machine [Video instructions]
- 3How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 4The App shows the message "Machine cannot accept the additional image. Please proceed to embroidery screen then select OK to the message ... mobile app. Update?"
- 5Embroidery
- 6How to adjust the thread tension
- 7How do I Play the MPEG-4 (MP4) Videos?
- 8How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 9How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 10How to Change Embroidering Order (My Connection) [Video]
- 11The App shows the message "Connection to the machine failed. Please reestablish the connection between the device and the machine."
- 12Fabric puckers
- 13The App shows the message "No Supported Machines Found".
- 14About the threads and the bobbin case when embroidering
- 15Basic procedure to sew stitches
- 16Machine does not start to sew.
- 17How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 18How do I get a lens calibration sheet?
- 19How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 20Tutorial videos on how to use My Design Snap with the machine [Video instructions]
- 21Needle breaks.
- 22How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 23How to Use the Thread Trimming Function. (Jump Stitch Trim)
- 24How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 25How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 26The App shows the message "The calibration sheet cannot be detected."
- 27"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 28Tips for sewing thin fabrics
- 29Fabric does not feed through the machine.
- 30The fabric feeds in the opposite direction.
- 31How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 32The App shows the message "Embroidery positioning sticker not found".
- 33The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 34Loops appear on the surface of the fabric when embroidering
- 35How do I hoop the fabric in the embroidery frame?
- 36How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 37How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 38How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 39How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 40How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 41How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 42How do I clean the race?
- 43Combination of fabric, thread and needle
- 44M5541001 appears on the Artspira app screen.
- 45How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 46Introducing Brother My Stitch Monitor application
- 47The App shows the message "The embroidery frame cannot be detected. Please try again to photo an image."
- 48"The safety device was activated since the main shaft motor seized. Is the thread tangled?" message appears on the LCD. What does it mean?
- 49How do I adjust the presser foot pressure?
- 50Cannot thread the needle.