FAQs & Troubleshooting
Popular |
149 Results
- 1Combination of fabric, thread and needle
- 2When thread gets tangled.
- 3Fabric and Thread
- 4How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 5How do I adjust an alternate bobbin case using an embroidery pattern?
- 6How do I create a space between characters?
- 7How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 8How to use the Multi-purpose Screwdriver.
- 9How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 10How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 11How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 12Embroidery
- 13How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 14How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 15When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 16How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 17How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 18How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 19How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 20How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 21How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 22How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 23How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 24How do I clean the shuttle race?
- 25How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 26How do I thread my machine ?
- 27How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 28How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 29How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 30How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 31How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 32How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 33How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 34How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 35How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 36"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 37How do I remove or attach the presser foot holder?
- 38"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 39How do I change the volume of operation sounds or alarm sounds?
- 40How do I specify the stitchiing width and stitch position using the sensor pen?
- 41"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 42When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 43How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 44How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 45How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 46"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 47How do I attach or remove the Embroidery Unit?
- 48How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 49How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 50How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]