FAQs & Troubleshooting
![]() |
Latest |
57 Results
- 112/07/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 212/07/2024"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 302/05/2023Where do I put the oil in my machine?
- 414/12/2022When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 509/07/2019"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 609/07/2019"Set the clock." message appears on the LCD. What does it mean?
- 709/07/2019"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 809/07/2019"This USB media is incompatible." message appears on the LCD. What does it mean?
- 909/07/2019"This USB media cannot be used." message appears on the LCD. What does it mean?
- 1009/07/2019"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 1109/07/2019"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 1209/07/2019"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 1323/10/2018Fabrics and stabilizer material for embroidery
- 1402/05/2018"This file cannot be used." message appears on the LCD. What does it mean?
- 1529/07/2016"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 1629/07/2016"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 1729/07/2016"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 1829/07/2016"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 1929/07/2016"Failed to save file." message appears on the LCD. What does it mean?
- 2029/07/2016"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 2129/07/2016"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 2229/07/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 2329/07/2016"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 2429/07/2016"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 2529/07/2016"Transmitting by USB" message appears on the LCD. What does it mean?
- 2629/07/2016"USB media error" message appears on the LCD. What does it mean?
- 2729/07/2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 2829/07/2016"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 2929/07/2016"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 3029/07/2016"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 3129/07/2016"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 3229/07/2016"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 3329/07/2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 3411/03/2016How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 3511/03/2016How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 3611/03/2016How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3723/10/2015Why does the lower thread keep breaking?
- 3827/08/2014How to use the Multi-purpose Screwdriver.
- 3906/02/2014How do I wind the bobbin?
- 4006/02/2014When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 4107/11/2012If the thread breaks during sewing.
- 4203/10/2012How do I change the volume of operation sounds or alarm sounds?
- 4321/09/2012How do I attach or remove the embroidery frame ?
- 4421/09/2012How do I remove or attach the Embroidery foot ?
- 4521/09/2012How do I attach or remove the Embroidery Unit?
- 4621/09/2012How do I adjust the clock on the display?
- 4721/09/2012How do I change the needle ?
- 4821/09/2012How do I thread my machine ?
- 4921/09/2012How do I set the bobbin ?
- 5014/09/2012"Preventive maintenance is recommended" appears on the LCD.