FAQs & Troubleshooting
 |
Popular |
57 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver.
- 3When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 4"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 5How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6How do I adjust an alternate bobbin case using an embroidery pattern?
- 7When thread gets tangled.
- 8How do I thread my machine ?
- 9Where do I put the oil in my machine?
- 10"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 11How do I clean the shuttle race?
- 12"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 13"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 14"Set the clock." message appears on the LCD. What does it mean?
- 15"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 16"Failed to save file." message appears on the LCD. What does it mean?
- 17How do I attach or remove the embroidery frame ?
- 18How do I change the needle ?
- 19"This USB media is incompatible." message appears on the LCD. What does it mean?
- 20"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 21"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 22"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 23"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 24"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 25"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 26"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 27My outline is sewing off the pattern
- 28Why does the lower thread keep breaking?
- 29Fabrics and stabilizer material for embroidery
- 30"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 31How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 32If the thread breaks during sewing.
- 33"This file cannot be used." message appears on the LCD. What does it mean?
- 34"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 35"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 36How do I change the volume of operation sounds or alarm sounds?
- 37How do I remove or attach the Embroidery foot ?
- 38How do I attach or remove the Embroidery Unit?
- 39How do I adjust the clock on the display?
- 40How do I set the bobbin ?
- 41How do I wind the bobbin?
- 42How do I create a space between characters?
- 43"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 44"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 45"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 46"Transmitting by USB" message appears on the LCD. What does it mean?
- 47"USB media error" message appears on the LCD. What does it mean?
- 48"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 49"This USB media cannot be used." message appears on the LCD. What does it mean?
- 50"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
