FAQs & Troubleshooting
![]() |
Popular |
56 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I adjust thread tension for embroidering?
- 4How do I adjust the sensitivity of the operation keys?
- 5How do I wind the bobbin?
- 6How do I thread the machine (Threading the upper thread)?
- 7How do I attach or remove the embroidery frame ?
- 8How do I hoop the fabric in the embroidery frame?
- 9How do I set the bobbin?
- 10Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 11"This USB media cannot be used." message appears on the LCD. What does it mean?
- 12It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 13How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 14How do I change the needle ?
- 15"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 16"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 17How to use the memory function to save embroidery patterns
- 18Stitches are skipped
- 19"Preventive maintenance is recommended." ppears on the LCD.
- 20"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 21"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 22How to change the needle stop position
- 23"F07" appears on the LCD. What does it mean?
- 24How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 25Where do I put the oil in my machine?
- 26"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 27"F05" appears on the LCD. What does it mean?
- 28"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 29"USB media error" message appears on the LCD. What does it mean?
- 30Fabric puckers
- 31"F04" appears on the LCD. What does it mean?
- 32"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 33When the thread became tangled under the bobbin winder seat
- 34"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 35"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 36"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 37How do I clean the race?
- 38"F02" appears on the LCD. What does it mean?
- 39"F01" appears on the LCD. What does it mean?
- 40"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 41"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 42How do I remove or attach the Embroidery foot ?
- 43How do I attach or remove the Embroidery Unit?
- 44"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 45Bobbin thread breaks
- 46Tips for getting better embroidery results
- 47"F06" appears on the LCD. What does it mean?
- 48"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 49Embroidery
- 50Needle breaks.