FAQs & Troubleshooting
![]() |
Popular |
36 Results
- 1How do I retrieve a specific embroidery pattern from the computer?
- 2How do I find if I am using Windows® 98 Second Edition?
- 3How do I clean the shuttle race?
- 4Embroidery
- 5Using the Spool Pin.
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7"This embroidery card can not be used on this machine." appears on the LCD.
- 8"The carriage of the embroidery unit will move." appears on the LCD.
- 9When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 10Why does the lower thread keep breaking?
- 11When thread gets tangled.
- 12How do I save often-used patterns in the machine's memory?
- 13"Return the bobbin winding shaft to left." appears on the LCD.
- 14Fabrics and stabilizer material for embroidery
- 15Where do I put the oil in my machine?
- 16"Deleting..." message appearing on the LCD. What does it mean?
- 17"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 18"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 19Threading the machine.
- 20How do I correctly install a bobbin?
- 21"Press the needle position button to raise the needle." appears on the LCD.
- 22"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 23"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 24"Saving..." appears on the LCD.
- 25"The bobbin thread is running out." appears on the LCD.
- 26"The pattern is too large for the embroidery frame." appears on the LCD.
- 27"Check and rethread the upper thread." appears on the LCD.
- 28How do I select patterns from the embroidery cards (sold separately)?
- 29My outline is sewing off the pattern
- 30"Lower the presser foot lever." appears on the LCD.
- 31"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 32"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 33"The safety device has been activated." appears on the LCD.
- 34F** or "F*" appears on the LCD. What does it mean?
- 35"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 36"Winding bobbin thread." appears on the LCD.