FAQs & Troubleshooting
Popular |
44 Results
- 1How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
- 2How do I attach the embroidery frame?
- 3"The safety device has been activated." appears on the LCD.
- 4When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 5Where do I put the oil in my machine?
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7Using the Spool Pin.
- 8How do I save often-used patterns in the machine's memory?
- 9How do I clean the shuttle race?
- 10How do I adjust a bobbin case using an embroidery pattern?
- 11Embroidery
- 12"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 13How do I correctly install a bobbin?
- 14"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 15Fabrics and stabilizer material for embroidery
- 16"Deleting..." message appearing on the LCD. What does it mean?
- 17"Winding bobbin thread." appears on the LCD.
- 18Threading the machine.
- 19F** or "F*" appears on the LCD. What does it mean?
- 20How do I wind the bobbin?
- 21"Lower the presser foot lever." appears on the LCD.
- 22"Press the needle position button to raise the needle." appears on the LCD.
- 23"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 24"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 25"Select a pattern." message appearing on the LCD. What does it mean?
- 26"This embroidery card can not be used on this machine." appears on the LCD.
- 27"This embroidery pattern can not be used on this machine." appears on the LCD.
- 28"The bobbin thread is running out." appears on the LCD.
- 29"The pattern is too large for the embroidery frame." appears on the LCD.
- 30"Return the bobbin winding shaft to left." appears on the LCD.
- 31"Insert an embroidery card." appears on the LCD.
- 32"Check and rethread the upper thread." appears on the LCD.
- 33My outline is sewing off the pattern
- 34Why does the lower thread keep breaking?
- 35When thread gets tangled.
- 36Upper Threading (Threading the upper thread)
- 37How do I create a space between characters?
- 38"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 39"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 40"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 41"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 42"Saving..." appears on the LCD.
- 43"The carriage of the embroidery unit will move." appears on the LCD.
- 44How do I select patterns from the embroidery cards (sold separately)?