FAQs & Troubleshooting
![]() |
Popular |
43 Results
- 1"Saving..." appears on the LCD.
- 2Embroidery
- 3Using the Spool Pin.
- 4How do I attach the embroidery frame?
- 5F** or "F*" appears on the LCD. What does it mean?
- 6How do I save often-used patterns in the machine's memory?
- 7How do I clean the shuttle race?
- 8"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 9"The bobbin thread is running out." appears on the LCD.
- 10"The pattern is too large for the embroidery frame." appears on the LCD.
- 11How do I select patterns from the embroidery cards (sold separately)?
- 12How do I adjust a bobbin case using an embroidery pattern?
- 13How do I correctly install a bobbin?
- 14"Deleting..." message appearing on the LCD. What does it mean?
- 15"Select a pattern." message appearing on the LCD. What does it mean?
- 16"This embroidery card can not be used on this machine." appears on the LCD.
- 17Fabrics and stabilizer material for embroidery
- 18When thread gets tangled.
- 19Upper Threading (Threading the upper thread)
- 20How do I wind the bobbin?
- 21It is difficult to pass the thread through the needle bar thread guide(hook).
- 22"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 23"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 24"This embroidery pattern can not be used on this machine." appears on the LCD.
- 25"The carriage of the embroidery unit will move." appears on the LCD.
- 26"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 27"Check and rethread the upper thread." appears on the LCD.
- 28"The safety device has been activated." appears on the LCD.
- 29When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 30Why does the lower thread keep breaking?
- 31"Lower the presser foot lever." appears on the LCD.
- 32"Press the needle position button to raise the needle." appears on the LCD.
- 33"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 34"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 35"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 36"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 37"Return the bobbin winding shaft to left." appears on the LCD.
- 38"Winding bobbin thread." appears on the LCD.
- 39"Insert an embroidery card." appears on the LCD.
- 40My outline is sewing off the pattern
- 41Where do I put the oil in my machine?
- 42How do I create a space between characters?
- 43Threading the machine.