FAQs & Troubleshooting
![]() |
Popular |
45 Results
- 1Upper Threading (Threading the upper thread)
- 2How do I adjust a bobbin case using an embroidery pattern?
- 3"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 4How do I clean the shuttle race?
- 5"The carriage of the embroidery unit will move." appears on the LCD.
- 6How do I find if I am using Windows® 98 Second Edition?
- 7My outline is sewing off the pattern
- 8How do I create a space between characters?
- 9How do I recall a specific embroidery pattern from the computer?
- 10"Press the needle position button to raise the needle." appears on the LCD.
- 11How do I select patterns from the embroidery cards (sold separately)?
- 12How do I save often-used patterns in the machine's memory?
- 13How do I wind the bobbin?
- 14"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 15"Select a pattern." message appearing on the LCD. What does it mean?
- 16"This embroidery card can not be used on this machine." appears on the LCD.
- 17"This embroidery pattern can not be used on this machine." appears on the LCD.
- 18"The pattern is too large for the embroidery frame." appears on the LCD.
- 19Fabrics and stabilizer material for embroidery
- 20Threading the machine.
- 21When thread gets tangled.
- 22F** or "F*" appears on the LCD. What does it mean?
- 23Where do I put the oil in my machine?
- 24"Lower the presser foot lever." appears on the LCD.
- 25It is difficult to pass the thread through the needle bar thread guide(hook).
- 26"Deleting..." message appearing on the LCD. What does it mean?
- 27"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 28"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 29"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 30"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 31"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 32"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 33"Saving..." appears on the LCD.
- 34"The bobbin thread is running out." appears on the LCD.
- 35"Return the bobbin winding shaft to left." appears on the LCD.
- 36"Winding bobbin thread." appears on the LCD.
- 37"Insert an embroidery card." appears on the LCD.
- 38"Check and rethread the upper thread." appears on the LCD.
- 39"The safety device has been activated." appears on the LCD.
- 40When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 41Why does the lower thread keep breaking?
- 42Embroidery
- 43Using the Spool Pin.
- 44How do I attach the embroidery frame?
- 45How do I correctly install a bobbin?