"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

"Remove the embroidery frame." message appears on the LCD. What does it mean?

"Select a pattern." message appears on the LCD. What does it mean?

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?

"OK to revert to previous color changes?" message appears on the LCD. What does it mean?

"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?

"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?

"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?

"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?

"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?

"Cannot change the configuration of the characters." appears on the LCD.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

"Preventive maintenance is recommended" appears on the LCD.

"Before embroidering, make sure the embroidery frame is moved as far back as possible and the frame-securing lever is locked down, then, press the "Start/Stop" button to embroidery." appears on the LCD.

"In twin needle mode, the automatic needle threading button cannot be used." appears on the LCD.

"OK to automatically lower the presser foot?" appears on the LCD.

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." appears on the LCD.

"This USB media is incompatible." appears on the LCD.

"OK to separate the combined border pattern?" appears on the LCD.

"Turn off the power and replace the needle plate." appears on the LCD.

"Lower the presser foot lever." appears on the LCD.

"The pockets are full. Delete a pattern." appears on the LCD.

"Transmitting by USB" appears on the LCD.

"USB media error" appears on the LCD.

"The USB media was changed. Do not change the USB media while it is being read." appears on the LCD.

"This USB media cannot be used." appears on the LCD.

"USB media is not loaded. Load USB media." appears on the LCD.

"The feed dogs are lowerd. Raise them." appears on the LCD.

"The feed dogs are raised. Lower them." appears on the LCD.

"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." appears on the LCD.

"Retrieving the pattern. Wait a moment." appears on the LCD.

"Not enough available memory to save the pattern. Delete another pattern?" appears on the LCD.

"The carriage of the embroidery unit will move. Keep your hands away from the carriage." appears on the LCD.

"The bobbin thread is almost empty." appears on the LCD.

"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.

"Attach the embroidery frame." appears on the LCD.

"Change to the extra large embroidery frame." appears on the LCD.

"Change to the large, or extra large embroidery frame." appears on the LCD.

"Change to a larger embroidery frame." appears on the LCD.