FAQs & Troubleshooting
Popular |
138 Results
- 1How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 2When thread gets tangled.
- 3How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 4How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 5How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 6How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 7Combination of fabric, thread and needle
- 8"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." appears on the LCD.
- 9How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 10How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 11How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 12How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 13How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 14How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 15"Cannot change the configuration of the characters." appears on the LCD.
- 16The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 17Why does the lower thread keep breaking?
- 18Embroidery
- 19Threading the machine.
- 20How to use the Multi-purpose Screwdriver.
- 21"In twin needle mode, the automatic needle threading button cannot be used." appears on the LCD.
- 22"The feed dogs are raised. Lower them." appears on the LCD.
- 23When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 24How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 25How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 26How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 27How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 28How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 29How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 30How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 31How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 32Where do I put the oil in my machine?
- 33How do I recall a specific embroidery pattern from the computer?
- 34"Turn off the power and replace the needle plate." appears on the LCD.
- 35"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 36"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 37How do I clean the shuttle race?
- 38Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?
- 39"Preventive maintenance is recommended" appears on the LCD.
- 40"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 41How do I thread my machine using the Automatic Threading Button?
- 42How do I save often-used patterns in the machine's memory?
- 43"The USB media was changed. Do not change the USB media while it is being read." appears on the LCD.
- 44"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 45"The carriage of the embroidery unit will move. Keep your hands away from the carriage." appears on the LCD.
- 46"The bobbin thread is almost empty." appears on the LCD.
- 47"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
- 48"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 49"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 50Fabric and Thread