FAQs & Troubleshooting
![]() |
Popular |
126 Results
- 1Combination of fabric, thread and needle
- 2How to use the Multi-purpose Screwdriver.
- 3When thread gets tangled.
- 4Where do I put the oil in my machine?
- 5Why does the lower thread keep breaking?
- 6Fabric and Thread
- 7How do I recall a specific embroidery pattern from the computer?
- 8How do I adjust an alternate bobbin case using an embroidery pattern?
- 9How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 10How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 11How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 12The stitch patterns cannot be selected.
- 13"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 14The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 15"Connected to PC. Do not disconnect the USB cable." appears on the LCD.
- 16How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 17How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 18How do I clean the shuttle race?
- 19How do I remove the presser foot holder?
- 20Can I get some illustrations on the machine's LCD showing how to thread the machine, change presser feet, wind the bobbin, etc?
- 21Embroidery
- 22Using the Spool Pin.
- 23How do I correctly install a bobbin?
- 24How do I save often-used patterns in the machine's memory?
- 25When can we use Standard GREEN Marked Bobbin Case?
- 26"The USB transmission caused embroidering to stop. Do not send a USB transmission while embroidering." appears on the LCD
- 27How do I find if I am using Windows® 98 Second Edition?
- 28The tension does not set on my sewing machine.
- 29For better results when sewing stretch fabrics
- 30How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 31How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 32How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 33How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 34How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 35How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 36To use your machine connected to the PC of Windows Vista
- 37How do I wind the bobbin?
- 38When free-motion quilting, stitches are skipped or my needle breaks.
- 39It is difficult to pass the thread through the needle bar thread guide(hook).
- 40How do I create a space between characters?
- 41"Before embroidering, make sure the embroidery frame is moved as far back as possible and the frame-securing lever is locked down, then, press the "Start/Stop" button to embroidery." appears on the LCD.
- 42"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 43"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 44"Retrieving the pattern. Wait a moment." appears on the LCD.
- 45"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
- 46"Select a pattern." appears on the LCD.
- 47When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 48My thread keeps jamming.
- 49My upper thread keeps breaking.
- 50How do I sew buttonholes?