FAQs & Troubleshooting
![]() |
Popular |
38 Results
- 1Basic operations and sewing [Video instructions]
- 2Stitches on top side are not made.
- 3How to use the Hemming set. (Optional accessory : SA221CV) [Video instructions]
- 4The machine does not work.
- 5How to use the Bias tape folder. (Optional accessory : SA222CV) [Video instructions]
- 6How to use the Belt loop guide. (Optional accessory : SA223CV) [Video instructions]
- 7The different type of the top cover stitches and a general guideline for thread tension settings.
- 8Stitches on back side are not made.
- 9Threading the machine [Video instructions]
- 10Differential feed adjustment
- 11How to use the Dual function fold binder. (Optional accessory : SA231CV) [Video instructions]
- 12How to remove the fabric from the machine when sewing top cover stitches.
- 13Adjusting the presser foot pressure
- 14The fabric becomes wavy after sewing
- 15How do I remove the top cover spreader and top cover thread guide from the machine?
- 16How to adjust the stitch length
- 17Turning direction of handwheel
- 18How do I thread the machine?
- 19How to attach and remove the presser foot
- 20Stitches are skipped.
- 21Preparation before threading
- 22How to use the Bias tape binding set. (Optional accessory : SA230CV) [Video instructions]
- 23Fabrics cannot be pulled out after sewing
- 24How to remove the fabric from the machine when sewing cover stitches.
- 25Fabric is puckered
- 26Stitches are not uniform
- 27Needles break
- 28Fabric does not feed.
- 29Adjusting the thread tension dials
- 30The thread tension is incorrect.
- 31The different type of the cover stitches and a general guideline for thread tension settings.
- 32How to adjust the looper thread tension
- 33How to remove and install the needle
- 34Threads break
- 35Free-arm sewing
- 36Opening and closing the front cover
- 37Powering the machine
- 38Cleaning