FAQs & Troubleshooting
Latest |
42 Results
- 117/03/2022"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 226/05/2016When should I use the extra spool pin?
- 331/03/2016How do I thread the needle?
- 431/03/2016How do I wind the bobbin?
- 523/03/2016How do I load the spool into the thread cassette?
- 623/10/2015Why does the lower thread keep breaking?
- 721/10/2015Combination of fabric, thread and needle
- 822/04/2015How do I sew a blind hem?
- 906/02/2014How do I thread my machine for use with the twin needle?
- 1006/02/2014How do I manually thread the needle?
- 1108/11/2011Where do I put the oil in my machine?
- 1202/04/2008It is difficult to pass the thread through the needle bar thread guide(hook).
- 1330/01/2008How do I remove the presser foot holder?
- 1429/01/2008How to I attach the spool of thread to my machine?
- 1528/01/2008How do I sew buttonholes?
- 1628/01/2008How do I sew on vinyl, leather, quilting layers and velvet?
- 1724/01/2008Why does my thread keep jamming?
- 1824/01/2008How do I sew an applique?
- 1924/01/2008How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 2018/01/2008"Lower the presser foot lever." appears on the LCD.
- 2117/01/2008"Change to the single needle mode." appears on the LCD.
- 2217/01/2008"Lower buttonhole lever." appears on the LCD.
- 2317/01/2008"Lift the buttonhole lever." appears on the LCD.
- 2417/01/2008"Disconnect the foot control." appears on the LCD.
- 2517/01/2008The thread is looping when I try to wind a bobbin.
- 2607/12/2007"Delete the selected pattern." appears on the LCD.
- 2713/11/2007"Press needle position button to raise needle." appears on the LCD.
- 2813/11/2007"The safety device has been activated." appears on the LCD.
- 2906/11/2007How do I correctly install a bobbin?
- 3003/10/2007Fabric and Thread
- 3102/10/2007The tension does not set on my sewing machine.
- 3227/09/2007Using the Spool Pin.
- 3308/01/2007My upper thread keeps breaking.
- 3404/08/2006When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 3528/06/2006"Cannot change." appears on the LCD.
- 3623/06/2006"Saving..." appears on the LCD.
- 3723/06/2006"No more stitches can be combined." appears on the LCD.
- 3822/06/2006"Return the bobbin winding shaft to left." appears on the LCD.
- 3922/06/2006"Winding bobbin thread." appears on the LCD.
- 4022/06/2006"Insert thread cassette." appears on the LCD.
- 4111/05/2006My needle keeps breaking
- 4209/05/2006When thread gets tangled.