FAQs & Troubleshooting
Popular |
39 Results
- 1It is difficult to pass the thread through the needle bar thread guide(hook).
- 2An "E7" message appears on the stitch indicator.
- 3Combination of fabric, thread and needle
- 4Fabric and Thread
- 5My automatic threader is not working.
- 6I can slide the stitch length adjustment slider, but I cannot adjust the stitch length.
- 7Using the Spool Pin.
- 8How do I manually thread the needle?
- 9The tension does not set on my sewing machine.
- 10How do I load the spool into the thread cassette?
- 11How do I thread the needle?
- 12An "E5" message appears on the panel.
- 13How do I sew an applique?
- 14Why does the lower thread keep breaking?
- 15How to I attach the spool of thread to my machine?
- 16An "E1" message appears on the panel.
- 17How do I sew on vinyl, leather, quilting layers and velvet?
- 18How do I thread my machine for use with the twin needle?
- 19How do I remove the presser foot holder?
- 20An "E8" message appears on the stitch indicator.
- 21An "E4" message appears on the panel.
- 22My upper thread keeps breaking.
- 23How do I sew a blind hem?
- 24The thread is looping when I try to wind a bobbin.
- 25When thread gets tangled.
- 26How do I correctly install a bobbin?
- 27Incorrect thread tension
- 28When should I use the extra spool pin?
- 29An "E3" message appears on the panel.
- 30Where do I put the oil in my machine?
- 31When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 32An "E6" message appears on the panel.
- 33An "E2" message appears on the panel.
- 34I can slide the stitch width adjustment slider, but I cannot adjust the stitch width (zigzag width).
- 35Why does my thread keep jamming?
- 36My needle keeps breaking
- 37How do I sew buttonholes?
- 38How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 39How do I wind the bobbin?