FAQs & Troubleshooting
Popular |
71 Results
- 1How to set up the cap frame driver. [Video instructions]
- 2How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 3How to set up the cap frame. [Video instructions]
- 4How do I thread the needle. [Video instructions]
- 5When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 6How do I thread my machine (Threading the upper thread). [Video instructions]
- 7"Preventive maintenance is recommended" appears on the LCD.
- 8"Floppy disk erase error." appears on the LCD.
- 9Why is the outline sewing off the pattern?
- 10There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 11"Unknown data format." appears on the LCD.
- 12"Maximum number of patterns have been combined." appears on the LCD.
- 13"Pattern is too large." appears on the LCD.
- 14"Floppy disk read error." appears on the LCD.
- 15"Needle case motor has been locked." appears on the LCD.
- 16"The thread number is invalid." appears on the LCD.
- 17"Change to the big frame." appears on the LCD.
- 18"USB read error." appears on the LCD.
- 19"Needle bar case home position error." appears on the LCD.
- 20Recommendation accessories
- 21"Impossible to reserve this needle." appears on the LCD.
- 22"Floppy disk was changed." appears on the LCD.
- 23"Cannot format." appears on the LCD.
- 24"Floppy disk write protect." appears on the LCD.
- 25"Needle bar case position error." appears on the LCD.
- 26Why does my thread keep jamming?
- 27Why does the needle keep breaking?
- 28Place a spool of thread on a spool pin
- 29Hooping the Fabric
- 30How do I find if I am using Windows® 98 Second Edition?
- 31Maintenance (Oiling the machine)
- 32"Impossible to add anymore characters." appears on the LCD.
- 33"Characters cannot be aligned." appears on the LCD.
- 34"This embroidery card cannot be used." appears on the LCD.
- 35"Embroidery card read error." appears on the LCD.
- 36"Cannot use this card." appears on the LCD.
- 37"Cannot use this disk." appears on the LCD.
- 38"No disk inserted or this disk may be defective." appears on the LCD.
- 39"Picker error." appears on the LCD.
- 40"Needle threader error." appears on the LCD.
- 41"Stop while needle bar case transferring." appears on the LCD.
- 42"Inappropriate needle stop position." appears on the LCD.
- 43The needle threader cannot be used.
- 44How do I thread the machine? (Threading the upper thread)
- 45Fabric/stabilizer compatibility chart
- 46Fabric and Thread
- 47How do I create a space between characters?
- 48"Impossible to set the start & the end points." appears on the LCD.
- 49"This file cannot be used." appears on the LCD.
- 50"Too many colours." appears on the LCD.