FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1Embroidery
- 2There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 3Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 4How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 5How to use the the versatile magnetic frame [Video instructions]
- 6How to Embroider on Bag. [Video instructions]
- 7How to Embroider on Shoes. [Video instructions]
- 8"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 9Maintenance (Cleaning the bobbin case) [ Video ]
- 10Fabric and Thread
- 11"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 12Maintenance (Cleaning around the needle plate)
- 13How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 14How to use the Round frame (PRPRFK1) [Video instructions]
- 15How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 16How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 17How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 18How to set up the cap frame. [Video instructions]
- 19How to set up the cap frame driver. [Video instructions]
- 20How to Embroider on Clothes. [Video instructions]
- 21How to Embroider on Cap. [Video instructions]
- 22When thread got tangled
- 23When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 24"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 25"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 26Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 27Maintenance (Cleaning around the needle plate) [ Video ]
- 28Maintenance (Clean the hook)
- 29"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 30"Needle threader error" message appears on the LCD. What does it mean?
- 31Stabilizers (Backing)
- 32"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 33"This USB media cannot be used." message appears on the LCD. What does it mean?
- 34How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 35Maintenance (Oiling the machine)
- 36"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 37How do I thread the machine? (Threading the upper thread)
- 38Fabric/stabilizer compatibility chart
- 39Hooping the Fabric
- 40"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 41"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 42"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 43"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 44"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 45"Trimming sensor error." message appears on the LCD. What does it mean?
- 46"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 47"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 48"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 49How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 50Maintenance (Cleaning the thread paths of the upper threads)