FAQs & Troubleshooting
Popular |
94 Results
- 1Maintenance (Oiling the machine) [ Video ]
- 2Maintenance (Cleaning around the needle plate) [ Video ]
- 3How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 4How to Embroider on Clothes. [Video instructions]
- 5How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 6How to set up the cap frame. [Video instructions]
- 7How to set up the cap frame driver. [Video instructions]
- 8How to Embroider on Cap. [Video instructions]
- 9How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 10How do I install the bobbin wound with thread?
- 11Embroidery
- 12Fabric and Thread
- 13Maintenance (Cleaning the bobbin case) [ Video ]
- 14Maintenance (Clean the hook) [ Video ]
- 15Maintenance (Oiling the machine)
- 16Maintenance (Cleaning around the needle plate)
- 17There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 18"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 19"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 20"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 21"Needle bar case home position error." message appears on the LCD. What does it mean?
- 22"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 23"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 24"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 25"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 26"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 27"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 28"This file cannot be used." message appears on the LCD. What does it mean?
- 29"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 30"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 31Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 32"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 33How do I change the volume of operation sounds or alarm sounds?
- 34Maintenance (Clean the hook)
- 35How do I create a space between characters?
- 36"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 37"Needle bar case position error" message appears on the LCD. What does it mean?
- 38"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 39When thread got tangled
- 40How do I thread the machine? (Threading the upper thread)
- 41Hooping the Fabric
- 42"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 43"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 44How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 45How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 46How to use the Round frame (PRPRFK1) [Video instructions]
- 47How to use the the versatile magnetic frame [Video instructions]
- 48How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 49How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 50"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?