FAQs & Troubleshooting
![]() |
Latest |
35 Results
- 123/10/2018Fabrics and stabilizer material for embroidery
- 216/02/2017When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 323/10/2015Why does the lower thread keep breaking?
- 408/09/2014"Lower the presser foot lever." appears on the LCD.
- 506/02/2014How do I wind the bobbin?
- 606/02/2014How do I thread my machine?
- 708/11/2011Where do I put the oil in my machine?
- 802/04/2008It is difficult to pass the thread through the needle bar thread guide(hook).
- 929/02/2008How do I use the needle threader?
- 1025/01/2008How do I create a space between characters?
- 1107/01/2008Threading the machine.
- 1206/11/2007How do I correctly install a bobbin?
- 1312/10/2007Embroidery
- 1427/09/2007Using the Spool Pin.
- 1522/06/2006"Return the bobbin winding shaft to left." appears on the LCD.
- 1622/06/2006"Winding bobbin thread." appears on the LCD.
- 1722/06/2006"Calculating. Please wait." appears on the LCD.
- 1822/06/2006"Saving" appears on the LCD.
- 1922/06/2006"Calculating cannot be done halfway through." appears on the LCD.
- 2022/06/2006"No more stitches can be combined." appears on the LCD.
- 2120/06/2006"Complete pattern entry." appears on the LCD.
- 2220/06/2006"Colour cannot be changed halfway." appears on the LCD.
- 2320/06/2006"Raise the needle to high position." appears on the LCD.
- 2420/06/2006"Embroidery pattern is exceeding sewing area." appears on the LCD.
- 2520/06/2006"This key does not work when needle is at low position. Raise the needle to high position and touch key again." appears on the LCD.
- 2620/06/2006"Raise the presser foot and re-thread." appears on the LCD.
- 2720/06/2006"Embroidery card is not inserted. Turn off main power and insert card." appears on the LCD.
- 2820/06/2006"This pattern cannot be saved in the memory." appears on the LCD.
- 2920/06/2006"This pattern is stored in other embroidery card." appears on the LCD.
- 3020/06/2006"No pattern is memorized." appears on the LCD.
- 3120/06/2006"Check if thread is entangled. Check if needle is bent." appears on the LCD.
- 3220/06/2006"Check if upper or lower thread is cut." appears on the LCD.
- 3320/06/2006"Select pattern." appears on the LCD.
- 3411/05/2006My outline is sewing off the pattern
- 3509/05/2006When thread gets tangled.