FAQs & Troubleshooting
Popular |
73 Results
- 1Why does the lower thread keep breaking?
- 2Combination of fabric, thread and needle
- 3How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 4F** or "F*" appears on the LCD. What does it mean?
- 5How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 6How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 7How do I manually thread the needle?
- 8When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 9How do I remove the presser foot holder?
- 10Using the Spool Pin.
- 11When thread gets tangled.
- 12How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 13How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 14How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 15How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 16How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 17It is difficult to pass the thread through the needle bar thread guide(hook).
- 18"Disconnect the foot control." appears on the LCD.
- 19I cannot select the pattern, when I press Buttonhole stitch key or Appliqué stitch key in the operation panel, It only changes the decreasing or increasing of tension on the upper thread.
- 20How do I correctly install a bobbin?
- 21How do I thread the twin needle?
- 22"Cannot change." appears on the LCD.
- 23"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 24How do I sew an applique?
- 25How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 26How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 27How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 28How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 29How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 30How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 31How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 32How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 33How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 34How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 35How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 36How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 37How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 38How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 39How do I wind the bobbin?
- 40"The safety device has been activated." appears on the LCD.
- 41Upper Threading (Threading the upper thread)
- 42"Lower the presser foot lever." appears on the LCD.
- 43"Return the bobbin winding shaft to left." appears on the LCD.
- 44How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 45How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 46How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 47"Saving..." appears on the LCD.
- 48"Delete the selected pattern." appears on the LCD.
- 49"Change to the single needle mode." appears on the LCD.
- 50When free-motion quilting, stitches are skipped or my needle breaks.