FAQs & Troubleshooting
Popular |
43 Results
- 1Where do I put the oil in my machine?
- 2How do I adjust a bobbin case using an embroidery pattern?
- 3How do I attach the embroidery frame?
- 4How do I clean the shuttle race?
- 5It is difficult to pass the thread through the needle bar thread guide(hook).
- 6"Saving..." appears on the LCD.
- 7When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 8Embroidery
- 9Using the Spool Pin.
- 10"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 11"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 12When thread gets tangled.
- 13F** or "F*" appears on the LCD. What does it mean?
- 14"This embroidery pattern can not be used on this machine." appears on the LCD.
- 15"Insert an embroidery card." appears on the LCD.
- 16My outline is sewing off the pattern
- 17Why does the lower thread keep breaking?
- 18Threading the machine.
- 19Upper Threading (Threading the upper thread)
- 20"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 21"Check and rethread the upper thread." appears on the LCD.
- 22How do I select patterns from the embroidery cards (sold separately)?
- 23How do I wind the bobbin?
- 24"Lower the presser foot lever." appears on the LCD.
- 25"Press the needle position button to raise the needle." appears on the LCD.
- 26"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 27"Deleting..." message appearing on the LCD. What does it mean?
- 28"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 29"This embroidery card can not be used on this machine." appears on the LCD.
- 30"The pattern is too large for the embroidery frame." appears on the LCD.
- 31"Return the bobbin winding shaft to left." appears on the LCD.
- 32"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 33Fabrics and stabilizer material for embroidery
- 34How do I save often-used patterns in the machine's memory?
- 35"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 36"The bobbin thread is running out." appears on the LCD.
- 37"Winding bobbin thread." appears on the LCD.
- 38How do I correctly install a bobbin?
- 39How do I create a space between characters?
- 40"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 41"The carriage of the embroidery unit will move." appears on the LCD.
- 42"The safety device has been activated." appears on the LCD.
- 43"Select a pattern." message appearing on the LCD. What does it mean?