FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Clothes. [Video instructions]
- 2How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 3How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 6Maintenance (Clean the hook) [ Video ]
- 7How to use the Round frame (PRPRFK1) [Video instructions]
- 8How to set up the cap frame driver. [Video instructions]
- 9How to Embroider on Shoes. [Video instructions]
- 10Embroidery
- 11There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 12How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 13How to use the the versatile magnetic frame [Video instructions]
- 14How to Embroider on Cap. [Video instructions]
- 15"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 16When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 17"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 18"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 19"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 20"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 21Maintenance (Cleaning the bobbin case) [ Video ]
- 22How do I create a space between characters?
- 23"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 24"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 25"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 26"This pattern cannot be used." message appears on the LCD. What does it mean?
- 27"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 28"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 29How do I change the volume of operation sounds or alarm sounds?
- 30Maintenance (Cleaning the bobbin case)
- 31"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 32Fabric/stabilizer compatibility chart
- 33"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 34"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 35"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 36"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 37"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 38"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 39"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 40"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 41"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 42"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 43Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 44How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 45Maintenance (Oiling the machine)
- 46Maintenance (Cleaning around the needle plate)
- 47"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 48"Picker error" message appears on the LCD. What does it mean?
- 49"Needle bar case position error" message appears on the LCD. What does it mean?
- 50When thread got tangled