FAQs & Troubleshooting
![]() |
Popular |
97 Results
- 51Combination of fabric, thread and needle
- 52Tips for sewing an even seam allowance
- 53"F7" appears on the LCD. What does it mean?
- 54How do I wind the bobbin?
- 55"E8" message appears on the LCD.
- 56How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 57List of Error Messages
- 58"E9" message appears on the LCD.
- 59The bobbin thread cannot be pulled up.
- 60Bobbin thread breaks
- 61"F5" appears on the LCD. What does it mean?
- 62Winding and Installing the Bobbin [Video instructions]
- 63Tangled thread on wrong side of fabric
- 64Incorrect thread tension
- 65How do I set the bobbin?
- 66How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 67How do I clean the race?
- 68"F9" appears on the LCD. What does it mean?
- 69"F6" appears on the LCD. What does it mean?
- 70"F2" appears on the LCD. What does it mean?
- 71"F1" appears on the LCD. What does it mean?
- 72Fabric is caught in the machine and cannot be removed
- 73When the thread became tangled under the bobbin winder seat
- 74How do I remove or attach the presser foot ?
- 75"E7" message appears on the LCD.
- 76"E6" message appears on the LCD.
- 77"E3" message appears on the LCD.
- 78"E2" message appears on the LCD.
- 79How do I raise or lower the feed dogs?
- 80"E1" message appears on the LCD.
- 81How to change the needle stop position
- 82Tips for sewing leathers or vinyl fabrics.
- 83Needle breaks.
- 84Upper thread breaks.
- 85Stitches are skipped
- 86The machine does not make stitches
- 87"F8" appears on the LCD. What does it mean?
- 88Tips for sewing thick fabrics
- 89How to use the foot controller with the machine
- 90How to adjust the thread tension
- 91"F3" appears on the LCD. What does it mean?
- 92It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 93How do I adjust a stitch width or length?
- 94How do I remove or attach the presser foot holder?
- 95How do I pull up the bobbin thread?
- 96"E5" message appears on the LCD.
- 97"E4" message appears on the LCD.