FAQs & Troubleshooting
![]() |
Popular |
164 Results
- 51How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 52How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 53How do I insert the bobbin case in the machine?
- 54Where do I put the oil in my machine?
- 55When can we use Standard GREEN Marked Bobbin Case?
- 56Why is there an extra needle plate supplied with my machine?
- 57"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 58"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 59"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 60How do I remove the presser foot holder?
- 61My outline is sewing off the pattern
- 62How do I sew an applique?
- 63"Preventive maintenance is recommended" appears on the LCD.
- 64Embroidery
- 65"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 66"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 67For better results when sewing stretch fabrics
- 68How do I attach or remove the embroidery frame ?
- 69"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- 70"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
- 71"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 72"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 73"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 74"Select a pattern." message appears on the LCD. What does it mean?
- 75"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 76My upper thread keeps breaking.
- 77How do I sew buttonholes?
- 78Fabrics and stabilizer material for embroidery
- 79The machine does not make stitches
- 80How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 81How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 82How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 83"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 84"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 85"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 86"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
- 87"There are no enough colors in the thread table, for the selected mode." message appears on the LCD. What does it mean?
- 88If the thread breaks during sewing.
- 89"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 90"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 91"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 92"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 93"OK to delete the setting?" message appears on the LCD. What does it mean?
- 94"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 95"Failed to save file." message appears on the LCD. What does it mean?
- 96How do I attach the walking foot ?
- 97How do I thread my machine when using the twin needle mode ?
- 98How do I thread my machine ?
- 99How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 100How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]