FAQs & Troubleshooting
Latest |
126 Results
- 5111/07/2016How do I thread my machine (Threading the upper thread)?
- 5213/04/2016How do I wind the bobbin?
- 5331/03/2016The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 5423/10/2015Why does the lower thread keep breaking?
- 5521/10/2015Combination of fabric, thread and needle
- 5621/10/2015How do I remove the presser foot holder?
- 5722/04/2015How do I sew a blind hem?
- 5827/08/2014How to use the Multi-purpose Screwdriver.
- 5906/02/2014How do I manually thread the needle?
- 6021/03/2013For better results when sewing stretch fabrics
- 6108/11/2011Where do I put the oil in my machine?
- 6202/04/2008It is difficult to pass the thread through the needle bar thread guide(hook).
- 6301/04/2008The stitch patterns cannot be selected.
- 6411/03/2008How do I clean the shuttle race?
- 6531/01/2008How do I thread my machine for use with the twin needle option?
- 6628/01/2008Does my machine support Windows Vista™ ?
- 6728/01/2008To use your machine connected to the PC of Windows Vista
- 6828/01/2008How do I sew buttonholes?
- 6928/01/2008How do I sew on vinyl, leather, quilting layers and velvet?
- 7024/01/2008How do I sew an applique?
- 7124/01/2008How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 7218/01/2008How do I save often-used patterns in the machine's memory?
- 7318/01/2008"Lower the presser foot lever." appears on the LCD.
- 7412/12/2007Can I get some illustrations on the machine's LCD showing how to thread the machine, change presser feet, wind the bobbin, etc?
- 7507/12/2007"Cannot change the configuration of the characters." appears on the LCD.
- 7606/11/2007"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 7706/11/2007"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 7806/11/2007How do I adjust an alternate bobbin case using an embroidery pattern?
- 7906/11/2007How do I correctly install a bobbin?
- 8012/10/2007Embroidery
- 8103/10/2007Fabric and Thread
- 8202/10/2007The tension does not set on my sewing machine.
- 8327/09/2007Using the Spool Pin.
- 8414/09/2007How do I recall a specific embroidery pattern from the computer?
- 8514/09/2007How do I select patterns from the embroidery cards (sold separately)?
- 8628/08/2007When can we use Standard GREEN Marked Bobbin Case?
- 8708/01/2007My thread keeps jamming.
- 8808/01/2007My upper thread keeps breaking.
- 8913/09/2006When free-motion quilting, stitches are skipped or my needle breaks.
- 9004/08/2006How do I create a space between characters?
- 9130/06/2006"This pattern cannot be used since it exceeds the data capacity." appears on the LCD.
- 9230/06/2006"This button cannot be used if the embroidery unit is attached." appears on the LCD.
- 9330/06/2006"The USB transmission caused embroidering to stop. Do not send a USB transmission while embroidering." appears on the LCD
- 9430/06/2006"This pattern cannot be used with this machine." appears on the LCD.
- 9530/06/2006"Saving the upgrade file. Do not turn MAIN power to OFF." appears on the LCD.
- 9630/06/2006"OK to save the current setting?" appears on the LCD.
- 9730/06/2006"No more than 12 patterns can be used. Reduce the number of patterns used." appears on the LCD.
- 9830/06/2006"In twin needle mode, the needle thread lever cannot be used." appears on the LCD.
- 9930/06/2006"Connected to PC. Do not disconnect the USB cable." appears on the LCD.
- 10030/06/2006"Before embroidering, make sure the embroidery frame is moved as far back as possible and the frame-securing lever is locked down, then, press the "Start/Stop" button to embroidery." appears on the LCD.