FAQs & Troubleshooting
Popular |
73 Results
- 51"Lower the presser foot lever." appears on the LCD.
- 52When free-motion quilting, stitches are skipped or my needle breaks.
- 53It is difficult to pass the thread through the needle bar thread guide(hook).
- 54When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the needle bar does not move.
- 55"Cannot change." appears on the LCD.
- 56"Saving..." appears on the LCD.
- 57"Delete the selected pattern." appears on the LCD.
- 58"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 59"Change to the single needle mode." appears on the LCD.
- 60"Lower buttonhole lever." appears on the LCD.
- 61"Lift the buttonhole lever." appears on the LCD.
- 62"Return the bobbin winding shaft to left." appears on the LCD.
- 63"The safety device has been activated." appears on the LCD.
- 64How do I remove the presser foot holder?
- 65I cannot select the pattern, when I press Buttonhole stitch key or Appliqué stitch key in the operation panel, It only changes the decreasing or increasing of tension on the upper thread.
- 66The tension does not set on my sewing machine.
- 67My upper thread keeps breaking.
- 68How do I sew an applique?
- 69How do I sew hook-and-loop fasteners (hook-and-loop tapes)?
- 70How do I sew on vinyl, leather, quilting layers and velvet?
- 71How do I sew a blind hem?
- 72Why does the lower thread keep breaking?
- 73How do I correctly install a bobbin?