SuperGalaxie 3000/3000C/3000D/3100D
![]() |
FAQs & Troubleshooting |
48 Results
Sort by
- 112/07/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 209/07/2019"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 306/08/2018"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 403/08/2018"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 504/06/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 629/07/2016"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 729/07/2016"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 829/07/2016"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 929/07/2016"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 1018/01/2008"Lower the presser foot lever." appears on the LCD.
- 1107/12/2007"Cannot change the configuration of the characters." appears on the LCD.
- 1206/11/2007"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 1306/11/2007"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 1403/07/2006"Set the bobbin holder to the left." appears on the LCD.
- 1503/07/2006"Formatting the floppy disk."appears on the LCD.
- 1603/07/2006"There is a pattern included that cannot be saved to a floppy disk. Save the pattern in the machine's memory." appears on the LCD.
- 1703/07/2006"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" appears on the LCD.
- 1803/07/2006"Deleting..." appears on the LCD.
- 1903/07/2006"There is not much thread remaining in the bobbin." appears on the LCD.
- 2003/07/2006"Saving..." appears on the LCD.
- 2103/07/2006"This disk is write protected. Can not delete the pattern. Dis-engage the write protection and try to delete again." appears on the LCD.
- 2203/07/2006"This disk is write protected. Cannot save the pattern. Dis-engage the write protection and save again." appears on the LCD.
- 2303/07/2006"No disk inserted or this disk may be defective." appears on the LCD.
- 2403/07/2006"Cannot save to this disk. The disk may be defective. Change the disk and try to save again." appears on the LCD.
- 2503/07/2006"Cannot format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." appears on the LCD.
- 2630/06/2006"Cannot read this disk. This disk may be defective." appears on the LCD.
- 2730/06/2006"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." appears on the LCD.
- 2830/06/2006"Change to the medium or large embroidery frame." appears on the LCD.
- 2930/06/2006"Change to the large embroidery frame." appears on the LCD.
- 3030/06/2006"The pattern is too large for the large embroidery frame." appears on the LCD.
- 3130/06/2006"Select a pattern." appears on the LCD.
- 3230/06/2006"The needle is down. Press the needle position button to raise the needle." appears on the LCD.
- 3330/06/2006"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." appears on the LCD.
- 3430/06/2006"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." appears on the LCD.
- 3530/06/2006"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries," appears on the LCD.
- 3630/06/2006"There is no embroidery card in the card slot. Insert an embroidery card." appears on the LCD.
- 3730/06/2006"OK to save the current setting?" appears on the LCD.
- 3830/06/2006"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." appears on the LCD.
- 3930/06/2006"Retrieving the pattern. Wait a moment." appears on the LCD.
- 4030/06/2006"Not enough available memory to save the pattern. Delete another pattern?" appears on the LCD.
- 4130/06/2006"The carriage of the embroidery unit will move. Keep your hands away from the carriage." appears on the LCD.
- 4230/06/2006"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
- 4330/06/2006"Attach the embroidery frame." appears on the LCD.
- 4428/06/2006"Lower the buttonhole lever." appears on the LCD.
- 4528/06/2006"Raise the buttonhole lever." appears on the LCD.
- 4628/06/2006"This key does not operate when the needle is down. Raise the needle and press the key again." appears on the LCD.
- 4728/06/2006"Data volume is too large for this pattern." appears on the LCD.
- 4828/06/2006"Check and rethread the upper thread." appears on the LCD.