"Failed to save file." message appears on the LCD. What does it mean?

"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?

"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?

"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?

"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?

"The wireless setting is not activated." message appears on the LCD. What does it mean?

"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

"Select a stitch." message appears on the LCD. What does it mean?

"Not enough available memory to save the data. Delete some patterns or use a different media." message appears on the LCD. What does it mean?

"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?

"OK to delete the setting?" message appears on the LCD. What does it mean?

"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

"This USB media cannot be used." message appears on the LCD. What does it mean?

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

"Attach the embroidery frame." message appears on the LCD. What does it mean?

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

"This key cannot be used at this time." message appears on the LCD. What does it mean?

"Preventive maintenance is recommended" appears on the LCD.

"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?

"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

"OK to move the embroidery carriage to its previous position?" message appears on the LCD. What does it mean?

"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?

"OK to revert to previous color changes?" message appears on the LCD. What does it mean?

"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

"Remove the embroidery frame or scanning frame." message appears on the LCD. What does it mean?

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

"This file cannot be used." message appears on the LCD. What does it mean?

"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?

"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?

"OK to delete the selected picture?" message appears on the LCD. What does it mean?

"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?

"Lower the presser foot lever." message appears on the LCD. What does it mean?

"USB media error" message appears on the LCD. What does it mean?

"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?

"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?