PR-620/620C/600II/600IIC
 |
FAQs & Troubleshooting |
38 Results
Sort by
- 107/01/2008"Preventive maintenance is recommended" appears on the LCD.
- 201/11/2007"Needle threader error." appears on the LCD.
- 301/11/2007"Check if thread is broken." appears on the LCD.
- 406/07/2006"USB media is not loaded. Load USB media." appears on the LCD.
- 506/07/2006"USB media error." appears on the LCD.
- 606/07/2006"The USB media was changed. Do not change the USB media while it is being read." appears on the LCD.
- 706/07/2006"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." appears on the LCD.
- 806/07/2006"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." appears on the LCD.
- 906/07/2006"Pattern will not fit. Please delete another pattern." appears on the LCD.
- 1006/07/2006"Not enough space. Delete some patterns or use a different USB media." appears on the LCD.
- 1106/07/2006"Delete error." appears on the LCD.
- 1206/07/2006"Area over." appears on the LCD.
- 1306/07/2006"Impossible to reserve this needle." appears on the LCD.
- 1406/07/2006"The thread number is invalid." appears on the LCD.
- 1506/07/2006"Needle threader is in threading position." appears on the LCD.
- 1606/07/2006"Impossible to set the start & the end points." appears on the LCD.
- 1706/07/2006"Impossible to add anymore characters." appears on the LCD.
- 1806/07/2006"This file cannot be used." appears on the LCD.
- 1906/07/2006"Unknown data format." appears on the LCD.
- 2006/07/2006"Change to the big frame." appears on the LCD.
- 2106/07/2006"The selected embroidery pattern exceeds size of the frame." appears on the LCD.
- 2206/07/2006"Characters cannot be aligned." appears on the LCD.
- 2306/07/2006"Too many colours." appears on the LCD.
- 2406/07/2006"Maximum number of patterns have been combined." appears on the LCD.
- 2506/07/2006"Pattern is too large." appears on the LCD.
- 2606/07/2006"This pattern contains too much data to be stored." appears on the LCD.
- 2706/07/2006"There is no embroidery card in the card slot. Insert an embroidery card." appears on the LCD.
- 2806/07/2006"This embroidery card cannot be used." appears on the LCD.
- 2906/07/2006"Embroidery card read error." appears on the LCD.
- 3006/07/2006"Pocket read error." appears on the LCD.
- 3106/07/2006"USB read error." appears on the LCD.
- 3206/07/2006"Picker error." appears on the LCD.
- 3306/07/2006"Wiper error." appears on the LCD.
- 3406/07/2006"Needle bar case home position error." appears on the LCD.
- 3506/07/2006"Stop while needle bar case transferring." appears on the LCD.
- 3606/07/2006"Needle case motor has been locked." appears on the LCD.
- 3706/07/2006"Needle bar case position error." appears on the LCD.
- 3806/07/2006"Inappropriate needle stop position." appears on the LCD.
