Innov-is 700E
FAQs & Troubleshooting |
24 Results
Sort by
- 120/05/2024F** or "F*" appears on the LCD. What does it mean?
- 204/06/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 304/06/2018"Deleting..." message appearing on the LCD. What does it mean?
- 404/06/2018"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 504/06/2018"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 604/06/2018"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 704/06/2018"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 804/06/2018"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 904/06/2018"Select a pattern." message appearing on the LCD. What does it mean?
- 1008/09/2014"Lower the presser foot lever." appears on the LCD.
- 1108/09/2014"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 1213/11/2007"The safety device has been activated." appears on the LCD.
- 1328/06/2006"Press the needle position button to raise the needle." appears on the LCD.
- 1423/06/2006"Turn off the machine and attach the embroidery unit." appears on the LCD.
- 1523/06/2006"This embroidery card can not be used on this machine." appears on the LCD.
- 1623/06/2006"Saving..." appears on the LCD.
- 1723/06/2006"This embroidery pattern can not be used on this machine." appears on the LCD.
- 1823/06/2006"The bobbin thread is running out." appears on the LCD.
- 1923/06/2006"The pattern is too large for the embroidery frame." appears on the LCD.
- 2022/06/2006"The carriage of the embroidery unit will move." appears on the LCD.
- 2122/06/2006"Return the bobbin winding shaft to left." appears on the LCD.
- 2222/06/2006"Winding bobbin thread." appears on the LCD.
- 2322/06/2006"Insert an embroidery card." appears on the LCD.
- 2422/06/2006"Check and rethread the upper thread." appears on the LCD.