Innov-is 1500D/1500
FAQs & Troubleshooting |
47 Results
Sort by
- 112/07/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 209/07/2019"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 306/08/2018"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
- 403/08/2018"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 529/07/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 629/07/2016"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
- 729/07/2016"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 829/07/2016"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 929/07/2016"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 1029/07/2016"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 1129/07/2016"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 1218/01/2008"Lower the presser foot lever." appears on the LCD.
- 1307/12/2007"Cannot change the configuration of the characters." appears on the LCD.
- 1406/11/2007"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 1506/11/2007"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 1630/06/2006"This pattern cannot be used since it exceeds the data capacity." appears on the LCD.
- 1730/06/2006"This button cannot be used if the embroidery unit is attached." appears on the LCD.
- 1830/06/2006"The USB transmission caused embroidering to stop. Do not send a USB transmission while embroidering." appears on the LCD
- 1930/06/2006"This pattern cannot be used with this machine." appears on the LCD.
- 2030/06/2006"Saving the upgrade file. Do not turn MAIN power to OFF." appears on the LCD.
- 2130/06/2006"OK to save the current setting?" appears on the LCD.
- 2230/06/2006"No more than 12 patterns can be used. Reduce the number of patterns used." appears on the LCD.
- 2330/06/2006"In twin needle mode, the needle thread lever cannot be used." appears on the LCD.
- 2430/06/2006"Connected to PC. Do not disconnect the USB cable." appears on the LCD.
- 2530/06/2006"Before embroidering, make sure the embroidery frame is moved as far back as possible and the frame-securing lever is locked down, then, press the "Start/Stop" button to embroidery." appears on the LCD.
- 2630/06/2006"OK to automatically lower the presser foot?" appears on the LCD.
- 2730/06/2006"Turn off the power and replace the needle plate." appears on the LCD.
- 2830/06/2006"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." appears on the LCD.
- 2930/06/2006"Retrieving the pattern. Wait a moment." appears on the LCD.
- 3030/06/2006"Not enough available memory to save the pattern. Delete another pattern?" appears on the LCD.
- 3130/06/2006"The carriage of the embroidery unit will move. Keep your hands away from the carriage." appears on the LCD.
- 3230/06/2006"The bobbin thread is almost empty." appears on the LCD.
- 3330/06/2006"The bobbin winder safety device has activated. Is the thread tangled?" appears on the LCD.
- 3430/06/2006"Attach the embroidery frame." appears on the LCD.
- 3528/06/2006"Change to the extra large embroidery frame." appears on the LCD.
- 3628/06/2006"Change to the large, or extra large embroidery frame." appears on the LCD.
- 3728/06/2006"Change to a larger embroidery frame." appears on the LCD.
- 3828/06/2006"Lower the buttonhole lever." appears on the LCD.
- 3928/06/2006"Raise the buttonhole lever." appears on the LCD.
- 4028/06/2006"This key does not operate when the needle is down. Raise the needle and press the key again." appears on the LCD.
- 4128/06/2006"Data volume is too large for this pattern." appears on the LCD.
- 4228/06/2006"No more patterns can be added to this combination." appears on the LCD.
- 4328/06/2006"Select a pattern." appears on the LCD.
- 4428/06/2006"There is no embroidery card in card slot. Insert an embroidery card." appears on the LCD.
- 4528/06/2006"Check and rethread the upper thread." appears on the LCD.
- 4628/06/2006"Use the presser foot lifter button to lower the presser foot." appears on the LCD.
- 4709/05/2006"This pattern cannot be used since it exceeds the data capacityā€¯ Error Message is displayed.