FAQs & Troubleshooting
Popular |
57 Results
- 1Maintenance [Video instructions]
- 2Combination of fabric, thread and needle
- 3Reverse sewing [Video instructions]
- 4Buttonhole sewing [Video instructions]
- 5Overcasting [Video instructions]
- 6Incorrect thread tension
- 7Thread tension [Video instructions]
- 8How do I install the bobbin wound with thread?
- 9Fabric and Thread
- 10How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 11Start sewing [Video instructions]
- 12Winding the bobbin and lower thread setting[Video instructions]
- 13Setting up the sewing machine[Video instructions]
- 14How do I wind the bobbin?
- 15How do I clean the machine? (Cleaning the race)
- 16When thread got tangled.
- 17For better results when sewing stretch fabrics
- 18How do I remove or attach the presser foot ?
- 19How do I thread my machine?
- 20When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 21An "E6" message appears on the panel.
- 22An "E4" message appears on the panel.
- 23An "E2" message appears on the panel.
- 24An "E1" message appears on the panel.
- 25Why does the upper thread keep breaking?
- 26How do I sew such as vinyl, leather, quilting layers and velvet?
- 27How do I sew a blind hem?
- 28Upper threading (Point)
- 29How do I correctly install a bobbin?
- 30How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 31The bobbin thread cannot be pulled up.
- 32The machine does not make stitches
- 33How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 34How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 35Replacing the needle [Video instructions]
- 36Blind hem stitching [Video instructions]
- 37Adjusting the stiitch length and width [Video instructions]
- 38Upper threading [Video instructions]
- 39F** or "F*" appears on the LCD. What does it mean?
- 40How do I remove or attach the presser foot holder?
- 41Tangled thread on wrong side of fabric
- 42Upper thread tightened up
- 43How do I change the needle ?
- 44Where do I put the oil in my machine?
- 45How do I draw up the lower thread?
- 46It is difficult to pass the thread through the needle bar thread guide(hook).
- 47An "E5" message appears on the panel.
- 48An "E3" message appears on the panel.
- 49Why does my thread keep jamming?
- 50The thread tension is incorrect.