FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Bag. [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4How to set up the cap frame driver. [Video instructions]
- 5Color thread table
- 6How to Embroider on Pet Collar. [Video instructions]
- 7How to Embroider on Shoes. [Video instructions]
- 8How to Embroider on Cap. [Video instructions]
- 9When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 10How do I adjust the tension of the bobbin thread ?
- 11Colors of Tajima (.dst) embroidery data
- 12How do I use the embroidery sheet ?
- 13How do I thread the machine? (Threading the upper thread)
- 14Creating Beautiful Embroidery ( Hooping techniques )
- 15The thread tension is incorrect.
- 16There is puckering in the fabric.
- 17What is DST ?
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19Maintenance (Cleaning the thread paths of the upper threads)
- 20Embroidery pattern does not sew out correctly.
- 21Stabilizers (Backing)
- 22How do I attach or remove the embroidery frame ?
- 23Loops appear on the surface of the fabric when embroidering.
- 24"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 25Fabric/stabilizer compatibility chart
- 26The bobbin thread breaks.
- 27"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 28Why does the needle keep breaking?
- 29"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 30"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 31How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 32How do I embroider on small pieces of fabric ?
- 33How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 34How do I wind the bobbin?
- 35Maintenance (Cleaning the bobbin case)
- 36How do I install the bobbin wound with thread?
- 37"This pattern cannot combine." message appears on the LCD. What does it mean?
- 38"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 39"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 40"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 41"OK to cancel embroidering?" message appears on the LCD. What does it mean and how do I clear it?
- 42"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 43How do I embroider on large pieces of fabric or heavy clothing ?
- 44How do I change the needle?
- 45How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 46How do I adjust the tension of the upper thread ?
- 47Maintenance (Clean the hook)
- 48"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 49"Needle threader error." message appears on the LCD. What does it mean and how do I clear it?
- 50Although the thread is not broken, a broken thread error occurs and the machine stops.