FAQs & Troubleshooting
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3Fabric and Thread
- 4How do I sew buttonholes?
- 5Where do I put the oil in my machine?
- 6Why does the lower thread keep breaking?
- 7How do I create a space between characters?
- 8How do I remove the presser foot holder?
- 9When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 10It is difficult to pass the thread through the needle bar thread guide(hook).
- 11Embroidery
- 12Place a spool of thread on a spool pin.
- 13How do I raise or lower the feed dogs?
- 14How do I wind the bobbin?
- 15"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 16"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
- 17"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 18How do I correctly install a bobbin?
- 19"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
- 20"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 21Why is the outline sewing off the pattern?
- 22"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 23"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 24How do I sew a blind hem?
- 25How do I thread my machine?
- 26"Formatting the floppy disk." message appearing on the LCD. What does it mean?
- 27"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 28"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 29"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 30"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 31"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 32"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 33Sometimes I insert a memory card or floppy disk, touch the appropriate icon, and the SG3000 screen blanks out, then turns back on. Sometimes the designs come up, but when I choose a design, the screen blanks out. Why is this?
- 34How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 35"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." message appearing on the LCD. What does it mean and how do I clear it?
- 36"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 37"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 38"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 39"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 40Why does my thread keep jamming?
- 41Why does the needle keep breaking?
- 42"Change to the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 43"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 44"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 45"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 47"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 48How do I sew an applique?
- 49How do I sew such as vinyl, leather, quilting layers and velvet?
- 50Fabrics and stabilizer material for embroidery