FAQs & Troubleshooting
Popular |
40 Results
- 1How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 2How do I sew with the twin needle?
- 3Start sewing [Video instructions]
- 4Basic operations and sewing [Video instructions]
- 5Satin Stitching [Video instructions]
- 6Zipper insertion [Video instructions]
- 7How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 8Where do I put the oil in my machine?
- 9Fabric and Thread
- 10Combination of fabric, thread and needle
- 11Maintenance [Video instructions]
- 12Buttonhole sewing [Video instructions]
- 13Upper threading [Video instructions]
- 14Winding the bobbin and lower thread setting [Video instructions]
- 15How do I thread my machine?
- 16How do I clean the machine? (Cleaning the race)
- 17When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 18Can I lower the feed dogs so that my machine doesn't feed fabric automatically?
- 19Upper thread tightened up
- 20Thread tension [Video instructions]
- 21How do I remove or attach the presser foot ?
- 22How do I sew such as vinyl, leather, quilting layers and velvet?
- 23The bobbin thread cannot be pulled up.
- 24Incorrect thread tension
- 25Tangled thread on wrong side of fabric
- 26Fabric is caught in the machine and cannot be removed
- 27Replacing the needle [Video instructions]
- 28Reverse sewing [Video instructions]
- 29Setting up the sewing machine [Video instructions]
- 30How do I thread my machine?
- 31Why does the lower thread keep breaking?
- 32The machine does not make stitches
- 33How do I change the needle ?
- 34How do I install the bobbin wound with thread?
- 35How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
- 36How do I wind the bobbin?
- 37Why does the needle keep breaking?
- 38How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 39How do I remove or attach the presser foot holder?
- 40How do I draw up the lower thread?