FAQs & Troubleshooting
![]() |
Popular |
57 Results
- 1Combination of fabric, thread and needle
- 2Fabric and Thread
- 3It is difficult to pass the thread through the needle bar thread guide(hook).
- 4How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 5Why does the lower thread keep breaking?
- 6How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 7The bobbin thread cannot be pulled up.
- 8The machine does not make stitches
- 9How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 10Buttonhole sewing [Video instructions]
- 11Start sewing [Video instructions]
- 12How do I clean the machine? (Cleaning the race)
- 13Maintenance [Video instructions]
- 14Setting up the sewing machine[Video instructions]
- 15Thread tension [Video instructions]
- 16How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 17Overcasting [Video instructions]
- 18Upper threading [Video instructions]
- 19How do I remove or attach the presser foot ?
- 20Where do I put the oil in my machine?
- 21An "E4" message appears on the panel.
- 22Blind hem stitching [Video instructions]
- 23Adjusting the stiitch length and width [Video instructions]
- 24Place a spool of thread on a spool pin.
- 25When thread got tangled.
- 26How do I remove or attach the presser foot holder?
- 27How do I sew such as vinyl, leather, quilting layers and velvet?
- 28Reverse sewing [Video instructions]
- 29Replacing the needle [Video instructions]
- 30Winding the bobbin and lower thread setting[Video instructions]
- 31The thread tension is incorrect.
- 32How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 33How do I correctly install a bobbin?
- 34How do I change the needle ?
- 35When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 36Why does my thread keep jamming?
- 37How do I sew a blind hem?
- 38F** or "F*" appears on the LCD. What does it mean?
- 39Tangled thread on wrong side of fabric
- 40Incorrect thread tension
- 41Upper thread tightened up
- 42For better results when sewing stretch fabrics
- 43How do I install the bobbin wound with thread?
- 44How do I draw up the lower thread?
- 45How do I thread my machine?
- 46How do I wind the bobbin?
- 47Why does the upper thread keep breaking?
- 48An "E6" message appears on the panel.
- 49An "E5" message appears on the panel.
- 50An "E3" message appears on the panel.