FAQs & Troubleshooting
![]() |
Popular |
56 Results
- 1Touch panel is malfunctioning.
- 2How do I hoop the fabric in the embroidery frame?
- 3How do I adjust thread tension for embroidering?
- 4Basic operations and embroidery functions [Video instructions]
- 5How do I thread the machine (Threading the upper thread)?
- 6How do I wind the bobbin?
- 7How do I set the bobbin?
- 8How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 9Stitches are skipped
- 10How do I change the needle ?
- 11How do I clean the race?
- 12How do I remove or attach the Embroidery foot ?
- 13Fabric puckers
- 14"USB media error" message appears on the LCD. What does it mean?
- 15"Preventive maintenance is recommended." message appears on the LCD. What does it mean?
- 16Upper thread breaks.
- 17"F07" appears on the LCD. What does it mean?
- 18How to change the needle stop position
- 19How to use the memory function to save embroidery patterns
- 20"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 21"F01" appears on the LCD. What does it mean?
- 22How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 23How do I adjust the sensitivity of the operation keys?
- 24"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 25"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 26"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 27It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 28Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 29"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 30Where do I put the oil in my machine?
- 31"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 32"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 33Bobbin thread breaks
- 34"F04" appears on the LCD. What does it mean?
- 35"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 36"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 37"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 38When the thread became tangled under the bobbin winder seat
- 39"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 40"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 41"This pattern cannot be used." message appears on the LCD. What does it mean?
- 42Needle breaks.
- 43Tips for getting better embroidery results
- 44"F06" appears on the LCD. What does it mean?
- 45"F05" appears on the LCD. What does it mean?
- 46"F03" appears on the LCD. What does it mean?
- 47"F02" appears on the LCD. What does it mean?
- 48"Not enough available memory to save." message appears on the LCD. What does it mean?
- 49How do I attach or remove the embroidery frame ?
- 50How do I attach or remove the Embroidery Unit?