FAQs & Troubleshooting
![]() |
Popular |
93 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 3How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 4Upper thread breaks.
- 5How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 6How do I clean the race?
- 7When the thread became tangled under the bobbin winder seat
- 8"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 9How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 10How to use the Binding Buttonhole Foot 2. (Optional accessory : SA111 / F084) [Video instructions]
- 11How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 12How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 13Outline of viewing and functions for keys on the utility stitch screen and the decorative stitch screen
- 14"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 15How do I edit the stitch stored in the machine with MY CUSTOM STITCH function?
- 16"F**" appears on the LCD. What does it mean?
- 17How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 18How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 19How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 20How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 21How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 22How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 23How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 24Tips for sewing thin fabrics
- 25How to adjust the thread tension
- 26Fabric is caught in the machine and cannot be removed
- 27How do I wind the bobbin?
- 28"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 29How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 30Bobbin thread breaks
- 31Fabric puckers
- 32Stitches are skipped
- 33How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 34How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 35Basic procedure to sew stitches
- 36How do I sew with the twin needle?
- 37How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 38How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 39How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 40How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 41How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 42How do I pull up the bobbin thread?
- 43"USB media error" message appears on the LCD. What does it mean?
- 44"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 45"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 46"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 47Combination of fabric, thread and needle
- 48How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 49"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 50"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?