FAQs & Troubleshooting
![]() |
Popular |
99 Results
- 1When thread got tangled.
- 2It is difficult to pass the thread through the needle bar thread guide(hook).
- 3Place a spool of thread on a spool pin.
- 4How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 5How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 6How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 7How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 8How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 9How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 10How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 11How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 12Where do I put the oil in my machine?
- 13"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 14The embroidery cover (the extension table) cannot put on the embroidery unit.
- 15Embroidery
- 16How do I thread the machine (Threading the upper thread)?
- 17"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 18How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 19How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 20How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 21How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 22"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 23"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 24How do I remove the presser foot holder?
- 25How do I thread the needle?
- 26How do I manually thread the needle?
- 27"Lower the presser foot lever." appears on the LCD.
- 28"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 29"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 30"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 31"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 32Why does the lower thread keep breaking?
- 33F** or "F*" appears on the LCD. What does it mean?
- 34How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 35How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 36How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 37How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 38How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 39"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 40"Selected a pattern." appears on the LCD.
- 41"Change to the single needle mode." appears on the LCD.
- 42Combination of fabric, thread and needle
- 43When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 44"Deleting..." message appearing on the LCD. What does it mean?
- 45"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 46"Saving..." message appearing on the LCD. What does it mean?
- 47"Lower the buttonhole lever." appears on the LCD.
- 48How do I raise or lower the feed dogs?
- 49Upper threading (Point)
- 50How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]