FAQs & Troubleshooting
 |
Popular |
139 Results
- 1How to use the Multi-purpose Screwdriver.
- 2Combination of fabric, thread and needle
- 3When thread got tangled.
- 4How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 5Embroidery
- 6How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 7How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 8How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 9How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 10How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 11How do I recall a specific embroidery pattern from the computer?
- 12How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 13How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 14How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 15Where do I put the oil in my machine?
- 16It is difficult to pass the thread through the needle bar thread guide(hook).
- 17How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 18How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 19How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 20How do I clean the race?
- 21How do I remove the presser foot holder?
- 22Fabric and Thread
- 23How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 24"Preventive maintenance is recommended" appears on the LCD.
- 25Place a spool of thread on a spool pin.
- 26Upper threading (Point)
- 27The stitch patterns cannot be selected.
- 28When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 29How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 30How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 31How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 32How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 33When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 34When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 35Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?
- 36How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 37"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 38"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 39How do I confirm Windows98SE?
- 40The needle position for the selecting straight stitch cannot be changed when using the "width" on the display.
- 41How do I sew buttonholes?
- 42How do I manually thread my machine?
- 43"Lower the presser foot lever." message appearing on the LCD. What does it mean and how do I clear it?
- 44"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 45How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 46How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 47When can we use Standard GREEN Marked Bobbin Case?
- 48Unable to successfully finish upgrading
- 49"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 50Why does the needle keep breaking?
