FAQs & Troubleshooting
![]() |
Popular |
327 Results
- 1Can I create the cutting data for ScanNCut from the image data?
- 2Adjusting the Blade Extension
- 3Mat and Cutting Blade Combinations
- 4About Blade Extension, Cutting Pressure and Mat
- 5List of Error Messages for CanvasWorkspace (Others)
- 6List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 7Downloading Optional Design Pattern Collection
- 8Where can I purchase any consumables or options for Brother Cutting Machine?
- 9Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 10List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 11The mat is fed in at an angle and is not fed during cutting / drawing.
- 12How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 13Instructions for “Fit to Path” Function on CanvasWorkspace (Windows/Mac)
- 14What should I do if the scanned and cut positions are misaligned?
- 15E00006 appears on the computer screen.
- 16When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 17How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 18ErrS90 appears on the computer screen.
- 19E92002 appears on the computer screen.
- 20E12006 appears on the computer screen.
- 21How to Recall from the Computer
- 22What type of data can my ScanNCut machine be used?
- 23ErrS07 appears on the computer screen.
- 24ErrS02 appears on the computer screen.
- 25Can multiple sheets of material be overlapped and attached to the mat?
- 26E00002 appears on the computer screen.
- 27Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 28E11008 appears on the computer screen.
- 29E01005 appears on the computer screen.
- 30Cutting/Drawing by Tracing an Image
- 31How to hide the adjustment lines and view the tracing area on Enhanced Image Tracing function. [Video]
- 32How to use Enhanced Image Tracing function via Tablet. [Video]
- 33“The entered text cannot be used.“ appears on the computer screen.
- 34ErrS03 appears on the computer screen.
- 35ErrS01 appears on the computer screen.
- 36If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 37How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
- 38List of Error Messages
- 39"Please register your machine." appears on the computer screen.
- 40E00001 appears on the computer screen.
- 41How to use Enhanced Image Tracing function. [Video]
- 42Foil Transfer Starter Kit. [Video]
- 4324inch Scanning Function [Video]
- 44How to Save Patterns in the Computer
- 45I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 46I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 47How long will the mat last?
- 48How do I Scan for Cutting (Direct Cut) ?
- 49The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 50The mat or the material catches on a feed roller during cutting/drawing.