FAQs & Troubleshooting
![]() |
Popular |
301 Results
- 1Mat and Material Combinations
- 2List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 3Mat and Cutting Blade Combinations
- 4How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 5N10004 appears on the computer screen.
- 6List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 7List of Error Messages for CanvasWorkspace (Others)
- 8Adjusting the Blade Extension
- 9Downloading Optional Design Pattern Collection
- 10E10004 appears on the computer screen.
- 11Can I create the cutting data for ScanNCut from the image data?
- 12What type of cut files and projects containing cut data other than built-in patterns are available?
- 13Can rough material be cut?
- 14How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
- 15What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 16E94005 appears on the computer screen.
- 17FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 18How to hide the adjustment lines and view the tracing area on Enhanced Image Tracing function. [Video]
- 19How to adjust the output smoothing level on Enhanced Image Tracing function. [Video]
- 20The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 21“The entered text cannot be used.“ appears on the computer screen.
- 22ErrS23 appears on the computer screen.
- 23E00006 appears on the computer screen.
- 24Pattern Collection activation on CanvasWorkspace(Web). [Video]
- 25Important Notice for using the Foil Transfer Starter Kit
- 26What type of data can my ScanNCut machine be used?
- 27How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 28E11006 appears on the computer screen.
- 29E01002 appears on the computer screen.
- 30E00005 appears on the computer screen.
- 31Enhanced Image Tracing : Editing/Adjusting the Tracing Area. [Video]
- 32When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 33I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 34The mat is fed in at an angle and is not fed during cutting / drawing.
- 35ErrS06 appears on the computer screen.
- 36E03002 appears on the computer screen.
- 37E00010 appears on the computer screen.
- 38Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 39How do I Scan for Cutting (Direct Cut) ?
- 40The machine is turned off (Auto Shut Down).
- 41ErrS51 appears on the computer screen.
- 42ErrS12 appears on the computer screen.
- 43ErrS03 appears on the computer screen.
- 44E12002 appears on the computer screen.
- 45List of Error Messages
- 46I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 47How long will the mat last?
- 48Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 49Can I create the cutting data for ScanNCut from vector graphics data?
- 50ErrS07 appears on the computer screen.